1. Plastic material handling

The water intake level of this abdominal muscle tissue is about 0.2%-.8%. For regular school abs plastic Moulding abs, use cookware at 80-85°C many-4 times or use a dry hopper for 1-2 hours at 80°C before doing.

For home heating system confirmation grade abdominal musculature that may have PC sheets, the drying temperature needs to be appropriately increased to 100°C, and the apparent drying time may actually depend on the movement of air movement inside the extrusion. Reused resource area cannot exceed 30%, and using repurposed components does not work in abs during the plating phase.

2. Snapshot molding process volume

Popular probabilistic molding software can make the decision well (sticker size dimension level 20:1, tension force greater than 2, injection tension over 1500bar). If masterbatches are available, or if the appearance of the product is desired, then a safe with little sizing is fine. , depending on the plastic sorting material type audit scheme and project characteristics.

3. Mold Design

The mold temperature can be set to 60-65°C. The size and style and glamour of the entire athlete are 6-8mm. The width of the door is about 3mm, the size is equivalent to one piece, and the time period for entering the door is less than 1mm. The exhaust pit is 4-6mm wide and weighs 0.025-0.05mm.

4. Melt temperature


The ambient picture method can be accurately relied on. The melting temperature is different. The creation of the following is actually encouraged:

Impact Class: 220°C-260°C to 250°C, Plating Quality: 250°C-275°C to 270°C

Heat resistance grade: 240°C-280°C, at 265°C-270°C, flame retardant grade: 200°C-240°C, at 220°C-230°C


like: